[音频分析仪]Flux Pure Analyzer v1.10.4 UNLOCKED [WiN]（64Mb）

纯分析仪系统–下一代RTA（实时分析仪）系统。 Flux :: Pure分析仪系统是模块化的RTA系统，可为任何可想像的音频分析和测量应用提供广泛的分析仪选项，从帮助您改善混音的宝贵帮助到专业母带制作，广播，后期处理的关键任务， 生产和现场工程师。

可用的附加模块如下：

纯分析器现场
纯分析仪计量
纯分析仪多通道

音频I/O和SampleGrabber插件

纯分析器完全支持标准硬件I/O与ASIO和核心音频。

除此之外，还提供了一个名为SampleGrabber的插件，它以所有标准的插件格式提供。SampleGrabber插件可以插入到任何支持标准插件的Daw或数字混合控制台上的插入链中，在那里它捕获源/响应音频信号并使用ZeroConf/Apple Bonjour协议将其发送到Pure Analyzer独立应用程序，实时分析音频。

您可以在相同的Daw、不同的DAWS甚至不同的计算机上插入SampleGrabber插件的任意多个实例，只要它们都连接到同一个网络，它们都可以连接到同一个Pure Analyzer应用程序。

Pure Analyzer应用程序显示在网络上找到的SampleGrabber实例的Source列表以及硬件I/O配置，只要简单地单击Source列表，就可以选择其中一个音频源作为分析的输入源。

网络需求

Pure Analyzer系统的网络配置设置是完全自动的，对用户是透明的。音频传输要求每个信道以44.1kHz的采样速率大约1.4Mbps，因此一个适当配置的标准以太网100 Mbps网络应该足以处理大多数情况。

SampleGrabber插件支持与多通道附加选项一起使用的多通道配置，96 kHz中的多通道5.1配置要求略小于20 Mbps。

显然，当在同一硬件上使用SampleGrabber和PureAnalyzer时，这些要求并不适用。

兼容性

Pure Analyzer系统可用于MacOSX、Windows、AIDD会场，支持多达16个频道(多通道/环绕声配置和多麦克风系统分析)，最高可达384千赫。

纯分析器中的图形分析渲染是使用GPU高效的2D/3D图形引擎，基于OpenGL 2.0标准，利用内置显卡上的GPU优化视听体验。

*毋须驾驶Ilok。
*我们的发行版比原始版本使用更少的内存，加载速度更快。

Pure Analyzer System – The Next Generation RTA (Real Time Analyzer) System. The Flux:: Pure Analyzer System is a modular RTA-system providing a comprehensive range of analyzer options for any imaginable audio analysis and measurement applications, from being an invaluable help to improve your mixes, to critical tasks for professional mastering, broadcast, post-production and live engineers.

Available add-on modules are:

Pure Analyzer Live
Pure Analyzer Metering
Pure Analyzer Multichannel

Audio I/O and the SampleGrabber Plug-in

The Pure Analyzer has full support for standard hardware I/O with ASIO and Core Audio.

In addition to this, a plug-in called SampleGrabber, available in all standard plug-in formats, is provided. The SampleGrabber plug-in can be inserted into the insert chain on any DAW or Digital Mixing Console supporting standard plug-ins, where it grabs the source/response audio signal and send it through the network using the ZeroConf/Apple Bonjour protocol to the Pure Analyzer stand-alone app that analyzes the audio in real time.

You can insert as many instances of SampleGrabber plug-ins as you need, on the same DAW, different DAWs, and even on different computers, and all of them can connect to the same Pure Analyzer app as long as they they’re all connected to the same network.

The Pure Analyzer app displays a Source list of SampleGrabber instances found on the network as well as the hardware I/O configuration, and with a simple click in the Source list one of the audio sources can be selected as the input source for the analysis.

Network Requirements

The network configuration setup for the Pure Analyzer System is entirely automatic and transparent to the user. The audio transport requires approximately 1.4Mbps for each channel at a sample rate of 44.1kHz, so a properly configured standard Ethernet 100Mbps network should be more than sufficient to handle most cases.

The SampleGrabber plug-in supports multichannel configurations for using with the Multichannel add-on option, and a multichannel 5.1 configuration in 96kHz demands slightly less than 20Mbps.

Obviously these requirements do not apply when using both SampleGrabber and Pure Analyzer on the same hardware.

Compatibility

The Pure Analyzer System is available for Mac OS X, Windows, AVID Venue, with support for up to 16 channels (in Multichannel/Surround configurations and Multi Microphone System Analysis) at up to 384 KHz.

The graphic analysis rendering in Pure Analyzer is using a GPU-efficient 2D/3D graphic engine, based on the OpenGL 2.0 standard, optimizing the audio-to-visual experience utilizing the GPU on the built in graphics card.

• No iLok driver is required to run.
• Our release uses less memory and loads faster than original.