[高质量音高转换工具]ToneLib TL Detuner v1.0.1 [WiN, MacOSX, UBUNTU]（38.9Mb）

Team R2R | 15 October 2024 | 38.9 MB

安装方法：

完全控制 Pitch

TL Detuner 是迄今为止以任何所需方式更改音高的最简单、最快捷的方法之一。无论你是想调音还是将音高从已经所在的地方转移到其他地方，TL Detuner 只需转动几下旋钮即可轻松处理，延迟最小。

简单的界面将使您能够避免与许多不明显的过多参数的任何混淆。

TL Detuner 工作流程只需三个步骤即可完成。使用 Detune/Fine 旋钮以你喜欢的方式移动音高。使用 Tone Stack 来强调所需的频率并消除任何可能的伪影。定义修改后的信号的 Dry/Wet ratio 和 Pan。就是这样！

板载
TL Detuner Rack – 尽可能简单、直观和方便
为了使 Pitch Shifter 的操作尽可能简单、直观和方便，TL Detuner 结合了简单而强大的音高控制所必需的所有参数。利用先进的信号处理算法，TL Detuner 能够以最小的延迟（小于 5 毫秒）改变音高。TL Detuner rack 由三个有源模块组成，用于串行处理输入信号。

Pitch Block
此块负责调整 Pitch 位置本身。【Detune】旋钮允许你将 Pitch 设置在 24 个半音的范围内。Fine 旋钮用于在一个全音范围内进行更精确的音高调整。

Tone Stack（音调堆栈）
Tone Stack （音调堆栈） 模块具有内置的 3 频段均衡器。它允许您过滤掉在处理输入信号过程中发生的任何伪影和失真，以及强调所需的频率。均衡仅在 Pitch Block 处理后应用于修改后的信号。

Mix Block（混音块）
Mix Block 允许你设置初始信号和修改后的信号之间的比率。Mix 参数值越低，允许的信号越多。同时，【Pan】旋钮将允许你调整混音中修改后的信号的声像调整。

Animated Visual Display
动画视觉显示功能将允许您详细跟踪使用插件时所做的更改。输入/输出的实时可视化允许您准确跟踪在调整特定参数时所做的更改。此功能使音频信号的处理尽可能直观。

辅助功能
通过完全可扩展的界面，您可以以最方便的方式安排您的 TL Detuner 工作区。

最轻的 DSP 可确保最低的 CPU 使用率：您可以处理多个插件实例，而不会在设备上出现任何可见的负载。

没有 DAW 没问题！TL Detuner 有 VST 和 Standalone 两种格式，因此您不一定需要 DAW 来利用其所有功能。

一个女巫说，

享受这个真正的 RSA keynat！

Flexible and Simple Tool for High-quality Pitch Shifting

Full control over the Pitch

TL Detuner is by far one of the simplest and quickest ways to change your pitch in any desired way. Whether you want to get in tune or shift your pitch somewhere else from where it already is, TL Detuner will easily handle it with just a couple of knob turns with minimal Latency.

Straightforward interface will enable you to escape any confusion with numerous unobvious excessive parameters.

TL Detuner workflow is done in three steps only. Use the Detune/Fine knobs to shift the pitch in a way you like. Use Tone Stack to emphasize the desired frequencies and remove any possible artifacts. Define the Dry/Wet ratio and the Pan of the modified signal. And that’s about it!

What’s on Board
TL Detuner Rack – As simple, intuitive and handy as possible
In an effort to make Pitch Shifter operation as simple, intuitive and handy as possible, TL Detuner combines all the parameters essential for simple, yet powerful pitch control. Utilizing an advanced signal processing algorithm allows TL Detuner to shift the pitch with minimal latency (less than 5 ms). TL Detuner rack consists of three active blocks that serially process the input signal.

Pitch Block
This block is in charge of adjusting the Pitch position itself. Detune knob allows you to set the Pitch roughly in range of 24 semitones. Fine knob is used for more precise Pitch adjustment within the range of a one whole tone.

Tone Stack
The Tone Stack block features a built-in 3-band EQ. It allows you to filter out any artifacts and distortion occurring during processing of the input signal, as well as to emphasize the desired frequencies. Equalization is applied only to the modified signal after Pitch Block processing.

Mix Block
Mix Block allows you to set the ratio between the initial and modified signal. The lower the Mix parameter value, the more unmodified signal will be let through. At the same time, the Pan knob will allow you to adjust the panning of the modified signal in the mix.

Animated Visual Display
Animated Visual Display feature will allow you to track in detail the changes made when working with the plugin. Real-time visualization of the input/output allows you to track exactly what changes you have made when adjusting a particular parameter. This feature makes working with audio signal as visual as possible.

Accessibility Features
With a fully scalable interface, you can arrange your TL Detuner workspace in the most convenient way possible.

The lightest DSP ensures minimal CPU usage: you can handle multiple plug-in instances without any visible load on your device.

No DAW No Problem! TL Detuner comes in both VST and Standalone formats, so you don’t necessarily need a DAW to utilize all its features.

A witch says,

Enjoy with this true RSA keygen!

Team R2R

🏠 HomePage