[沉浸式听觉激励器]Red Rock Sound Inspirer v1.0.0 [WIN]（8.12MB）

BUBBiX | 23 November 2024 | 8.12 MB

安装方法：安装之后，替换插件。

Inspirer 沉浸式听觉激励器
Red Rock Sound Inspirer 插件的开发是为了满足当代沉浸式音乐混音中对最大表观响度日益增长的需求。

虽然许多现有技术依靠压缩和限制来增强调制和创造激动人心的声音，但 Inspirer 更进一步。它可以增强几乎任何音频材料的响度，无论之前的压缩或动态范围如何。此外，Inspirer 还能赋予模拟控制台固有的温暖和特性。使用

从头开始设计的 Inspirer 插件，可以节省时间并避免繁琐的手动工作，可快速、高效地处理中/侧、立体声和对象、沉浸式混音环境的床（固定通道）。

单元
此模块允许您从四个可用听觉激励器中选择一个。听觉激励器串联排列，这允许您使用不同的激励器设置处理通道。
例如：第一个听觉激励器仅为中间声道，第二个听觉激励器仅为侧声道，第三个听觉激励器是左右声道。对于多声道模式：第一个听觉激励器仅为左右声道，第二个听觉激励器是中央声道，第三个听觉激励器是 LFE，等等。

您可以重命名单元按钮以方便使用。要重命名选定的单元按钮，请右键单击该按钮。

为了打开听觉激励器的独奏（监听），请双击选定的单元编号。独奏模式下的单元会发出黄光，要退出独奏模式，请再次双击。对于双声道模式，只有一个单元可以是独奏模式。对于多声道模式，可以独奏一个或多个单元。要
绕过选定的听觉激励器处理，请按下选定的单元编号一次单击 + Shift。在旁路模式下，按钮将发出红光。

您还可以将所有听觉激励器设置复制到另一个单元。为此，选择要从中复制设置的设备，然后单击复制按钮，然后选择要将设置复制到的设备。

输入路由输入
路由可让您在 44 个常见通道设置之间进行选择，从立体声到 7.1.4 和 9.1.6。只需在输入路由模块中选择适合您音轨的通道设置即可。

您还可以创建自己的输入路由配置文件。有 16 个独立通道可用。

单击输入路由选择显示旁边的编辑按钮。按住 Shift 键并选择所需的通道数。按顺序命名选定的通道。然后单击保存并命名配置文件。

64 位：（VST2、VST3）+ 32 位：（VST2、VST3）

• Red Rock Sound 不支持旧 PT 12.5 的 AAX，因此没有必要包含修补的 AAX。
• 使用 PT 12.5 中通过 Blue Cats PatchWork 修补的 VST2、VST3 作为解决方案。😉

Inspirer Immersive Aural Exciter
The Red Rock Sound Inspirer plug-in is developed to meet the growing demand for maximum apparent loudness in contemporary immersive music mixes.

While many existing techniques rely on compression and limiting to enhance modulation and create an exciting sound, the Inspirer takes these methods a step further. It can boost the loudness of virtually any audio material, regardless of prior compression or dynamic range. Moreover, the Inspirer is capable of imparting the warmth and character inherent to analog consoles.

Save time and avoid tedious manual workarounds with the Inspirer plug-in designed from the ground up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.

Units
This module allows you to select an Aural Exciter from four available. The Aural Exciters are arranged in series, this allows you to process channels with different Exciter settings.
For example: the first Aural Exciter is only the mid channel, the second Aural Exciter is only the side channel, the third Aural Exciter is the left and right channel. For multi-channel modes: the first Aural Exciter is only the left and right channels, the second Aural Exciter is the center channel, the third Aural Exciter is the LFE, etc.

You can rename unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.

In order to turn on the solo (listen) of the Aural Exciter, double-click on the selected unit number. The unit in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one unit can be solo mode. For multi-channel modes, one or more units can be soloed.
To bypass selected Aural Exciter processing, press the selected unit number one click + shift. In bypass mode, the button will glow red.

You can also copy all Aural Exciter settings to another unit. To do this, select the unit from which you want to copy the settings, then click on the copy button, then select the unit to which you want to copy the settings.

Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.

You can also create your own input routing profiles. 16 independent channels are available.

Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.

64-bit: (VST2, VST3) + 32-bit: (VST2, VST3)

• Red Rock Sound doesn’t support AAX with old PT 12.5, so no point including patched AAX.
• Use patched VST2, VST3 via Blue Cats PatchWork in PT 12.5 as solution. 😉

🏠 HomePage